Throttle Valve and Pneumatic Throttle Control

Pneumatic Throttle Control Valve Suppliers, Get free quote Now for 6.7 Cummins Throttle Valve

 

Throttle Body Valve is a type of butterfly valve that is located between the air intake manifold and filter. Air Throttle Valve controls the amount of air that can enter the car depending upon the driver's input through the gas pedal. Throttle Body Butterfly Valve is a flat valve that is controlled by a pedal. The pressure difference between the exhaust and intake valve timings and engine speed affects the amount of residual gas. Operation of Exhaust Throttle Valve increases the pumping loss and exhaust gas temperature. When the flow of the pump is regulated by  Hydraulic Throttle Valve the system curve changes.

The operating point shifts to the left flow is decreased. A pneumatic Throttle Valve is used to control the flow of air from the driver device. The flow of air from side A to side b can be controlled but the inverse is not possible. To precisely control the idle speed in a vehicle Electronic Throttle Valve is used. This is controlled by changing the Throttle Valve In Diesel Engines' electrical polarity. the throttle Valve 6.7 Cummins sits between the truck's intake horn and the exhaust.  6.7 Cummins Throttle Valve works with the EGR system to recirculate exhaust gas through the intake by lower pipe emission.

Throttle Valve In Hydraulic System to control the flow of hydraulics. Moreover, Throttle Valve Are Used In Mcq as well. We have been producing these 12v Cummins Throttle Linkage and valves for generations and have been following the international standards

 

Table of Content

 

No need to pay extra when you can buy hydraulic throttle check valve in exact sizes, check Throttle Valve Function

 

Specification format of Throttle Check Valve

BRAND NAME TU-LOK SIZE 1/2" TO 4"  THREAD NPT, BSPP, BSPT CONNECTION THREADED, FLANGE END FLANGE CLASS 150#, 300#, 600#, 900#, 1500#, 2500# PRESSURE RATING 1500 PSI, 3000 PSI, 6000 PSI, 10000 PSI MATERIAL SS 316, SS 304, SS 316 TI, COPPER, BRASS, DUPLEX, CS, INCONEL, SUPER DUPLEX, HASTELLOY, MONEL, ALLOY 20, SMO 254, 904L, TITANIUM & ALL OTHER ALLOYS

 

What is Throttle Valve ?

Valves are basically used to control or regulate the flow of the fluid in a particular system. One such valve is the Throttle Valve that is used to control the amount of air that flows through the engine. The throttle Control Valve is similar to the pedal of the car. It creates a closed loop control system to ensure that the throttle is open. One of the advantages of an electronic Throttle Check Valve is that it can be linked to systems like traction control, engine control, cruise control, and electronic stability control. Throttle valve manufacturers recommend these valves since the other systems can take control of the throttle when required thus improving fuel efficiency, vehicle safety, and convenience. 

 

Throttle Control Valve Price list

Description Price One-Way Flow Control Pneumatic Air Throttle Check Valves  US $ 1.25 / Piece Y Type Brass Water Flow Control Throttle Check Valves US $ 10 / Piece Hydraulic One-Way Throttle Valve Kc-02 Kc-03 Kc-04 06 Flow Control Valves US $ 3.5-14 / Piece C Type Exhaust Muffling Throttle Valves US $ 0.1-0.5 / Piece

 

Check Air Throttle Valve Actuator size range or get 12v Cummins Throttle Linkage in custom size , view Throttle Body Valve Symbol

 

Throttle Valve Manufacturer in india

HYDRAULIC THROTTLE VALVES

THROTTLE VALVES

 

Function of Throttle Body Valve

 

valves operation that can alter the liquid stream rate inside the circuit is analyzed in this paper. A 3D demonstrate for a valves unit was built and presented into numerical examination utilizing ANSYS CFX. Based on the characterized approaching information the show operation was analyzed and the comes about are displayed in arrange to highlight how the parameters changes when utilizing the throttle valves inside the pressure driven circuit.

 

technical data of Hydraulic Throttle Valves

Size

6

Maximum operating pressure

bar

315

Maximum flow

l/min

70

Hydraulic fluid

see table

Hydraulic fluid temperature range

NBR seals

°C

-30 … +80

FKM seals

°C

-20 … +80

Viscosity range

mm²/s

10 … 800

contamination of the hydraulic fluid Maximum admissible degree o

according to ISO 4406 (c) Class 18/20/15

 

Air Throttle Valves Symbol

 

difference between a Throttle Control Valves (TCV) and a Flow Control Valve s(FCV)?

Flow Control Valves

These valves constrain the stream rate through the valve to a indicated esteem in a client chosen course. A stream rate is utilized to control the operation of a flow control valves.

Throttle Control Valves (TCVs)

Thrust Lever Control Valves reenact minor misfortune components whose head misfortune characteristics alter over time. With a Thrust Lever control valve, the minor misfortune 'K' is balanced based on a few other framework stream or head.

 

Don't forget to check our latest price and working of Exhaust and Intake Throttle Valve

 

Pneumatic Throttle Valve Used for

Thrust Lever valves is utilized in the intake manifold to decrease the control yield for part-load operation

 

Intake Throttle Valve External Dimension Diagram

 

 

Features of Electronic Throttle Valve

• Straight through flow with minimal pressure loss.
• Visual float position indicator to show us % throttle of piping system.
• Max. Pressure : 6 Bar/85Psi.
• Multi turn Linear motion throttle valve.
• End connections: Female Threaded type
• Its slow operation prevents water hammer.

 

Throttle Body Butterfly Valve Size chart

PT A
mm C
mm L
mm Flow L/min Max pressure
kgf/cm² weight
(g) 1/4 24 7 63 12 250 265 3/8 27 7 68 20 325 1/2 32 10 79 30 495 3/4 40 10 92 48 885 1 46 10 96 60 1100

 

Buy Throttle Butterfly Valve at best price for in hydraulic system and engine

 

Throttle Body Valve Symptoms

• Electrical problems
• on the inside of the housing grime, Dirt, and carbon deposits causing interruption in air/fuel flow.
• Poor or high idle.
• Vacuum leaks or an incorrectly adjusted throttle stop.

 

Dimension of Throttle Body Valve

Dimensions Size BSP NPT d dk E L H Thd./in Thd./in 50mm(2”) 11 11.5 65 48 117 130 275 65mm(2½”) 11 8 74 63 117 182 393 80mm(3”) 11 8 93 74 117 182 393

 

Throttle Check Valve Characteristic curves

 

6.7 Cummins Throttle Valves application

Thrust Lever Check valves are utilized where volume streams have to be be infinitely controlled in one heading whereas permitting for complimentary stream within the switch heading. A commonplace utilize is the speed control of barrel or other actuators. The free flow check permits for meter-in or meter-out actuator control.

 

Throttle Check Valve Dimension

 

Nominal diameter

Maximum operating pressure
MPa {kgf/cm2}

Maximum control flow rate
L/min

Check valve Cracking pressure MPa {kgf/cm2}

Mass kg

⅜

 

 

 

21 {210}

30

 

0.2 {2}

2.7

1.5

 

¾

 

75

4.2

3.6

9.5

 

1¼

 

190

 

0.15 {1.5}

11

9.4

11*1

2

470

0.2 {2}

21*1

 

Air Throttle Valve Sectional structural diagram

 

Look what we supply and where ?

Canada, Singapore, Philippines, Malaysia Throttle Check Valves
Europe, Japan, Malaysia, Romania Throttle Control Valves
China, Sweden, Malaysia, Colombia Throttle Body Valves
 Malaysia, Los Alamos -Mexico, Philippines, Taiwan Throttle Valves Actuator
Singapore, Malaysia, NY 12203 (USA),South Korea Exhaust Thrust Lever Valves
Dammam -KSA, Philippines, Belgium, Indonesia Intake Throttles Valves
Qatar, Europe, Thailand, France Hydraulic Throttle Valves
Czechia, Thailand, Malaysia, Germany Air Thrust Lever Valves
 Malaysia, Bangladesh, Finland, USA Pneumatic Thrust Lever Valves
South Africa, Kuwait, Brazil, Saudi Arabia (KSA) Electronic Throttle Valves
Bahrain, Singapore, Singapore, South Africa 6.7 Cummins Thrust Lever Valves
Philippines, UK, Nigeria, Australia 12v Cummins Throttle Linkage