Looking to buy a CNC RS232 cable that is fully tested on many types of CNC machines and equipment?
What you are buying is a 10 foot long RS 232 cable that has been fully tested on many machines and RS232 communication devices and many different applications. There are different pinouts for RS232 that can sometimes make it difficult when it comes to setting up software for specific handshaking. This cable will work for a single computer to most CNC's using XON/XOFF handshaking. RTS and CTS signals are jumped out. cable A02b-0200-K814 replacement. Also known as a serial null modem cable but with extra jumpers installed.
For more information, please visit our website.
This CNC RS232C cable is a thin and flexible cable that is great for storing in a laptop bag. If you would like a more robust, thicker diameter cable please purchase one of our custom made cables:
Click here for Custom Build / Length CNC RS 232 Cable.
Talk to our RS232 Specialist - (414) 973-2339
Having service engineers in the field of CNC's and automation, we have been able to test this cable extensively and it is standard for and Mitsubishi controls.
Here is a list of the controls that we have tested this cable on. Old machines prior to 1995 may need special wired rs 232 cables.
Many machine builders have front end controls as well such as Mazak, Mori with or Mitsubishi controls in the back ground. This has been tested on many of these machines as well.
Specifications- Serial null modem cable
This cable is 10ft long with a 9-pin female and 25-pin male connectors on either end. A02b-0200-K814
For more information, please visit FSW.
Some machines like Fadal and Prototrack require a DB25 Female connector - please request cable with female or buy a DB25 female to DB25 female gender changer. Please note that if there is a connector on a machine and it is male, many times these were printer ports NOT RS232 ports. Plugging into a printer port can cause damage to the machine tool and your PC. Always use caution when the port is male. Call us if you need to determine what the port is.
We highly recommend ordering a LED tester if you do not have one with every cable to help troubleshoot your RS232 communications problems with your PC, cable or machine. Check out our RS232 Mini Tester DB25 LED
30 day warranty, Tech phone support and setup
Talk to our RS232 Specialist - (414) 973-2339
Do you need a Custom RS232 cable? see our Custom wired RS232 cable.
Buy the RS232 Cable for your CNC communications now!
Contact us to discuss your requirements of Machine Tool Cables cnc cable. Our experienced sales team can help you identify the options that best suit your needs.