Hello, i was reading around here and on google but I can&#;t really find a good answer for me and maybe you can help me.
I want to make a DIY laser/ cnc but the problem is that I don&#;t know what Board to use that will meet all my needs.
I like the new one from the Neje master 2s the fact that is 32bit but I need to connect Z axes to. So the laser will lower with each pass in LightBurn or for when I want to focus.
I would like to add a rotary module to.
I would like it to be fast and good as the one from neje
I would like to add a Dremel module for when I need to carve a little bit. (make a hot swap module)
I would like it to have some wireless capability&#;s
I would like to add the LightBurn camera
I would like to add some display to show me some info/ control?
Do I need some special power source?
This is the laser that I will use: 80w Diod Laser
I appreciate all the help that I will get from this forum and you don&#;t even know how much you will helm me with your answers.
Thank you all.
So the question is what would be the best board in your opinion that I can use
The world of laser cutting hinges on precision and power. For creators and entrepreneurs, selecting the right laser cutter can be a significant decision. A common question that arises is: How thick can an OMTech Polar 80 watt CO2 laser cut?
This blog delves into the cutting capabilities of the OMTech Polar 80 watt CO2 laser, explores factors influencing cutting depth, and then highlights the advantages of choosing a Monport 80 watt CO2 laser instead.
Monport 80W CO2 Laser Engraver & Cutter (36" x 24") with FDA Approved
CO2 lasers, including the OMTech 80 watt model and Monport 80 watt CO2 laser, utilize focused beams of light generated by carbon dioxide gas to precisely cut and engrave a wide range of materials. The 80 watts of power in this laser translates to its ability to deliver a specific amount of energy onto the material being cut. This concentrated energy melts or vaporizes the material, creating a clean and precise cut edge.
While the wattage of a laser plays a significant role in cutting depth, it's not the sole factor to consider. Here are some key elements that influence how thick an OMTech 80 watt CO2 laser (and any other similarly powered CO2 laser like Monport 80 watt CO2 laser) can cut:
Material Type: Different materials have varying degrees of heat resistance. For example, wood, acrylic, and thin plastics are generally easier to cut through compared to denser materials like metals or thick stone.
Laser Settings: The cutting depth can be adjusted by controlling the laser's power output, cutting speed, and the number of cutting passes. Higher power and slower speeds will generally result in deeper cuts.
If you are looking for more details, kindly visit Tiper.
Material Thickness: The thickness of the material itself directly impacts the laser's ability to cut all the way through. A thicker material will require more laser power and potentially adjusted settings to achieve a complete cut.
It's important to remember that these are estimates, and the actual achievable cutting depth will vary depending on the factors mentioned above. Here's a general guideline for common materials, applicable to an OMTech 80 watt CO2 laser and Monport 80 watt CO2 laser:
Material Estimated Cutting Depth Wood Up to 1/2 inch (12.7 mm) Leather Up to 1/8 inch (3.17 mm) Acrylic Up to 1/4 inch (6.35 mm) Thin Plastics Up to 1/8 inch (3.17 mm)Important Notes:
These are general estimates and the actual achievable cutting depth will vary depending on several factors, including:
Thicker materials or those requiring more precision may necessitate multiple cutting passes with adjusted settings.
It's recommended to consult the user manual or manufacturer specifications for specific cutting recommendations for your chosen laser and materials.
While an OMTech 80 watt CO2 laser offers a decent cutting capability, there are several advantages to choosing a Monport 80 watt CO2 laser instead:
Let's explore the features of the Monport 80W CO2 Laser Engraver and how they elevate your laser cutting experience compared to an OMTech model:
Feature Monport 80 Watt CO2 Laser OMTech AF-80Use code BESTMP10
for 10% Discount
Work Area 20" x 28" (larger work area for bigger projects) 20" x 28" Cutting Ability Up to 20mm (thicker cuts) Up to 10mm (thinner cuts) Speed 800mm/s (faster cutting speeds) 600mm/s (slower cutting speeds) Software Compatibility LightBurn, RDWorks, CorelDRAW, AutoCAD (wider software options) RDWorks, LightBurn, CorelDRAW, AutoCAD Pass Through Front and Back (increased material handling flexibility) Front, Back, Left, Right Control Panel DIDA DIDA Guide Rail Enclosed guide rail (improves cutting precision) Linear Guides Air Assist Yes Yes Water Chiller External Water Pump (included) No built-in chiller (requires separate purchase)
Whether you're a seasoned laser user or just starting your cutting journey, a Monport 80 watt CO2 laser offers a powerful and versatile solution that goes beyond what an OMTech model might provide. With its user-friendly features, comprehensive support, and the ability to cut through a wide range of materials, a Monport 80 watt CO2 laser empowers you to bring your creative visions to life with confidence.
Contact Monport Laser Today!
Ready to explore the exciting world of laser cutting and discover the advantages of choosing Monport? Visit Monport Laser today to learn more about our 80 watt CO2 laser and how it can elevate your laser cutting experience.
Contact us to discuss your requirements of 80 Watt Laser Cutting Machine. Our experienced sales team can help you identify the options that best suit your needs.