View Details

Double Cardan Land Rover Drive Shaft, Land Rover Propshaft

Shaft fits most Land Rover front applications that use a 4 bolt flange at each end. Does not fit Discovery 2 front.

Double cardan shaft, also known as a CV. This is what you need if your vehicle is lifted and you are experiencing vibrations or other problems due to increased angles. On rear shafts, perfectly smooth operation may require adjustment of rear pinion angle. Shaft is built with series joints.

Tom Wood's drive shafts are built using only the highest quality components. Key features listed below. 

• 2" diameter 0.120" wall USA made DOM tube. 

• series joints.

• Forged slip yoke. 
• Greaseable CV center ball. This is an important one. Because of the proximity to the heat of the exhaust, regular greasing is a must.Your choice between Tom Wood's exclusive Gold Seal

   

  greaseable universal joints or non-greaseable joints.
• Your choice of spline and slip yoke options,

   

  more about that here.
• Bolts directly to your stock transfer case and differential flanges.
• Best of all every shaft can be custom built to whatever length you need. So you can be sure that you will get the right thing the first time around.

Measure the distance between your transfer case flange and pinion flange, as shown in the photo below. 

Types of Cardan Shaft

--

Cardan shafts, also known by the name of drive shafts, mainly originated in mid 19th century in automotive industry. It comprises of a telescopic sleeve, shaft tube and two cross joints that help in adjusting the distance between the drive axle and transmission. In heavy duty cardan shafts used for power transmission, they also play the role of vibration damping, cushioning and improving the overall dynamic performance of the complete shaft system. Every cardan shaft has two halves- one connected to the main shaft and the other that is connected to the driven shaft.

Different types of cardan shafts

Though originally used in the automotive industry, cardan shafts are today used in the field of mechanical engineering for different purposes. These cardan shafts can divided in to following types depending on their structure:

&#;Light Cardan shafts: These shafts have a low inertia and large mounting angles. They are mainly used in the paper making industry, pumping equipment, general machinery and test machines. The flange diameters range within 58&#;225 mm and the torque ranges from 180&#; Nm.

&#;Long series cardan shafts: These shafts have a lightweight design, low inertia, maximum bearing life and a high torsional rigidity. These are mainly used in down coiler, pumping equipment, marine drives and large paper machines. The flange diameters in these shafts range from 160&#;390 mm and the torque ranges from - Nm.

&#;Medium size cardan shafts: This is the most versatile range of cardan shafts product line. They have a high torque and compact rhythm. They are typically used in the large marine drives, steel rolling mills, straightening machines and cranes. The flange diameters among these range from 160 to 620 mm and the torque ranges from - nm.

&#;Heavy duty cardan shafts: These are heavy duty cardan shafts that are made of fixed raw materials through a specialized heat treatment process. These heavy duty cardan shafts are used in plate mills, crushers, tube piercers, and windmill test machines. The flange diameters in these range within 680&#; mm and the torque ranges within - nm.

&#;Hollow penetration cardan shafts: These shafts are used in the danielli type mills for the applications where large contractions and expansions are needed. However, the installation length is limited, thus making it useful only for H beam mills and bar mills. Their flange diameter ranges within 225- 490 mm and the torque between - nm.

&#;Ultra short cardan shafts: These cardan shafts are used in applications where there is an extremely limited installation length with a compact design. These are installed in marines, windmills and locomotives. Their flange diameter ranges within 275- 440 mm and the torque between - nm.

Different cardan shafts have different prices depending upon their usage. Life of a cardan shaft is around one year. After this, they need to be replaced. However, do remember, this replacement cannot be counted as waste of money. Rather, it is an investment that helps in proper and efficient working of your machinery. We are a cardan shaft supplier. If you are interested in our products, please contact us now!

The company is the world’s best Heavy Duty Cardan Shaft supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.