If you need the Hiperco 50A alloy, buy it in the Auremo online shop at favourable prices.
The Hiperco 50A alloy is a soft magnetic alloy. It is easy to forge. The Hiperco 50A alloy is a soft magnetic iron-cobalt-vanadium alloy with high saturation induction. This alloy has the highest saturation induction among soft magnetic materials and has a high Curie point of 940&#;. Thanks to the high magnetic saturation induction, a motor with this alloy can be significantly reduced in volume and weight to less than 50% of a conventional motor with the same performance. In addition, the motor offers high sensitivity, low heat generation, good stability and a long service life. Due to the high Curie point, the alloy can be operated at higher temperatures at which other soft magnetic materials are demagnetised, and it exhibits good magnetic stability. The performance stability of the motor at higher operating temperatures is better than that of permanent magnet motors.
The Hiperco 50A alloy is very difficult to form due to its high cobalt content.
In our online shop Auremo you will find the alloy Hiperco 50A, we also have a large selection of other materials at favourable prices. If you have any questions, please contact us.
Hiperco 50A Powder is a soft magnetic alloy with 49% Cobalt, 2% Vanadium, and 49% Iron, with a 24-kilogauss magnetic saturation, a high maximum permeability to direct current, a low coercive force to direct current, and a low A.C. core loss. Compared to other iron-cobalt soft magnetic alloys on the market, this alloy has superior magnetic characteristics. It is widely used in power transformers, magnetic amplifiers, and ultrasonic generators.
Chemical composition (%)
Co
V
C
Si
Mn
P
S
Cu
Ni
Fe
&#;
49.0-51.0
0.80-1.80
0.040
0.30
0.30
0.020
0.020
0.20
0.50
Bal.
Youngson Product Page
Magnetic properties
Type
Magnetic induction under different magnetic field intensities
(A/M) / T
Coercive force
HC/(A/m)
B800
B
B
B
B
&#;
&#;
Manufactured product
-
-
2.05
2.15
2.2
144
1) High-Performance Electrical Motors: Used in motors that require high magnetic saturation and low core losses.
2) Transformers: Employed in transformers for its high magnetic permeability and efficient energy transfer.
3) Magnetic Bearings: Utilized in magnetic bearings due to its excellent magnetic properties.
Sensors: Applied in magnetic sensors and actuators.
4) Aerospace: Used in aerospace applications where high-strength and high-magnetic performance materials are required.
5) Electronics: Employed in various electronic components that benefit from its unique magnetic properties.
Our Hiperco 50A Powder is carefully handled during storage and transportation to preserve the quality of our product in its original condition.
Are you interested in learning more about Hiperco 50A alloy supplier? Contact us today to secure an expert consultation!