The Role And Advantage of Use Reinforcement Mesh

17 Jun.,2024

 

The Role And Advantage of Use Reinforcement Mesh


If you are looking for more details, kindly visit our website.

1.Improve project quality


Reinforced Welded Wire Mesh is manufactured by fully automatic and intelligent production line under the strict quality control of the factory. Grid size, rebar specifications and quality are all strictly controlled. The omission of the artificial help net is avoided. Bundling errors and cut corners occur. The mesh has large steel, good elasticity, uniform and accurate spacing, and high welding point strength. Thus greatly improving the quality of the project.


2. Improved seismic and crack resistance


The longitudinal and transverse bars of the Concrete Reinforcing Mesh form a network structure, so it has good adhesion and anchorage with concrete, and the load is evenly distributed. This significantly improves the seismic crack resistance of reinforced concrete structures. Bridge Reinforcement Steel Mesh can improve the rigidity. According to actual tests, the laying of welded steel mesh on roads can reduce the occurrence of cracks by more than 75% compared to artificial netting.


3. Reducing the amount of reinforcing steel


According to the principle of equal strength replacement, and considering comprehensive factors, the use of reinforcing steel mesh can save more than 30% of the amount of reinforcing steel used. And the reinforcement mesh needs to be processed after being transported to the construction site, so there is no loss.


Concrete Reinforcing Mesh

4. Speed up the construction progress


the use of reinforced welded mesh can make the project construction faster. As long as the reinforced welded mesh is laid as required, the concrete can be poured, eliminating the need for on-site cutting of the reinforcement, placing them one by one, and tying up. It can save 50%-70% of man-hours, greatly speed up the construction schedule and shorten the construction cycle.


5. A lot of man-hours for lowering the reinforcing bar device


50% -70% less than the binding net. With a relatively tight reinforcement distance, the longitudinal bars and cross bars of the Reinforcement Mesh form a net-like structure to bond and anchor together, which is beneficial to avoid Occurrence and development of concrete cracks. Welded mesh of road, floor, and floor equipment can reduce cracks on the concrete surface by about 75%.


6. Particularly suitable for large-area concrete projects


If you want to learn more, please visit our website Xingtai Steel.

the mesh size of the welded mesh is very regular, much larger than that of hand-stitched mesh, the mesh has large rigidity and good elasticity, and the steel bar is not easily bent, deformed and slipped when the concrete is irrigated. The thickness of the concrete protective layer is easy to control and uniform, which obviously improves the quality of reinforced concrete engineering.


7. Welded wire mesh has better generalized economic benefits.


The planned strength of welded wire reinforcement is 50% higher than that of Grade I rebar to 70%. It is still possible after considering some structural requirements. It saves about 30% of the reinforcing steel, and the processing cost of the loose steel reinforcement with a diameter of less than 12mm is about 10% ~ 15% of the material cost. Inductive consideration can reduce the cost of the reinforcing steel project by about 10%.


What are the Advantages of Using Steel Mesh?

Steel reinforcing mesh is also known as reinforced welded wire mesh, welded wire mesh, construction mesh, Welded Wire Mesh, steel mesh, etc. Reinforcing steel mesh is a mesh made of crossbonded or welded longitudinal and transverse steel bars. Reinforcing steel mesh can be divided into: shaped reinforcing steel mesh and formula reinforcing steel mesh. Reinforcement material: CRB550 grade cold rolled ribbed steel bars;. Rebar mesh is widely used in the construction of beams and columns, roofs, walls, sidewalks, bridges, highway cracks, airport runways, tunnel linings, box culverts, dock floors, factories and other projects.


Construction Reinforcing Mesh is firstly made of high quality low carbon steel wire, stainless steel wire and reinforcing mesh using ribbed or cold rolled round steel bars at right angles longitudinally and horizontally, cross welded by certain angles. Distance. Construction steel mesh is divided into hot-dip galvanized, electro-galvanized, PVC coated, dipping, special welded wire mesh, mainly used in bridges, highways, tunnel backboards, high-rise floor slabs, subway culverts, power station projects, dam foundations, ports, docks, river banks, airport runways and other various reinforced concrete structure projects.

Construction Reinforcing Mesh

Advantages of reinforcement mesh:

1) Significantly improve the quality of reinforcement works

2) Significantly improve the speed of construction

3) Enhance the crack resistance of concrete

4) Better overall economic benefits

5) Save labor

6) Reduce project cost


The welded mesh of construction reinforcing mesh should be made of CRB550 grade cold rolled ribbed steel bar, or CRB510 grade cold drawn glossy steel bar. A piece of welded mesh should be welded with the same kind of steel bars. There are two types of welded wire mesh: fixed and customized. The spacing and diameter of reinforcement in two directions of shaped welded wire mesh can be different, but the diameter, spacing and length of reinforcement in the same direction should be the same, which is stipulated in relevant standards and regulations.


The company provides various kinds of steel wire mesh and stainless steel wire mesh, if you need, please feel free to contact the Reinforcing Mesh Suppliers

The company is the world’s best structural mesh supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.