'358' comes from its size 3 'x 0.5' x 8 , equivalent to approximately 76.2mm x 12.7mm x 4mm (length x height x diameter) in metric system.358 security fences are extremely difficult to penetrate, small mesh holes are effective against fingers, and traditional hand tools are extremely difficult to attack.The 358 fences are considered one of the most difficult obstacles to break through, because they are difficult to climb.It is also called a safety fence and a high strength fence.358 safety fence panel can be partially bent to enhance the aesthetic effect.
If you are looking for more details, kindly visit our website.
Although the security fence has many of the attributes of the 358 security fence, its main advantage is that it is lighter and thus more widely used.It's lighter and cheaper, so it's perfect for business applications. If you want to know more about the advantages of 358 Fence , please stay tuned to our website.
Pre&#;358 security fence
Next&#;358/High security fencing installation steps
If you&#;ve been researching high-security fence systems, you&#;ve probably wondered why they call 358 mesh prison fence.
The good news is that this type of fence is not only used for prisons. It can be used in any setting where high-security fencing is required, but here&#;s why they call 358 mesh prison fence.
The first reason some people call 358 mesh prison fence is that it&#;s very hard to cut. That&#;s one of the requirements for any fence around a prison or any high-security facility where you need an effective barrier.
358 mesh is not only made from thick wire, but the aperture size also makes it almost impossible to get the leverage needed to cut the mesh with any hand tool.
So, while you can cut a 358 mesh fence with a grinder and other types of power tools, you can&#;t do it quietly or without a lot of sparks to alert your guards!
Another reason many people call 358 mesh prison fence is that it&#;s hard to climb, for the same reason.
The apertures of 358 mesh panels are too small to get any kind of fingerhold, so it&#;s impossible to climb the fence itself without ladders or ropes.
Most 358 mesh prison fences are also topped with serrated comb, razor coils or electric fence, so even if someone does get to the top of the fence, they will have a hard time getting over.
For more information, please visit Woda.
Finally, many 358 mesh prison fences are bowed or curved inwards, which means that you not only have to climb the fence, but you also have to defy gravity to get to the top of the panel, which acts as its own overhang.
358 mesh is a very heavy mesh panel. In fact, it weighs about 10 kilograms or 22 lbs per square meter, or per 10.76 square feet.
Since the average panel is at least 3 x 3m, or at least 9 square meters, that means that each panel would weigh upwards of 90kgs or nearly 200 lbs. That&#;s before you add any of the steel structure to the weight of the fence.
This type of heavy-weight fencing is naturally vehicle resistant, and in most cases, if you were to drive into a 358 mesh prison fence, you would not be driving the same vehicle away.
Even though a 358 mesh prison fence is about as close as you can get to building a steel wall, it still offers good visibility from most angles, which allows CCTV camera systems and human guards to see what&#;s happening on both sides of the fence at the same time.
358 mesh might not only be used for prison fences, but it is perfectly suited to the job.
This kind of fencing does exactly what you want it to do in a setting like this. Slows down any breach attempts dramatically until a security team can respond and deter attempts because it&#;s simply so hard to get over or through.
So, if you have a very high-security site and you need as close to an impenetrable fence as you can get, a 358 mesh fence combined with electronic monitoring is probably as close as you can get.
358 mesh security fence is made of rectangular opening welded mesh with finger proof aperture. The 358 mesh has an opening of 3 inch in length, 0.5 inch in height and the wire gauge applied is BWG 8. 358 Mesh gets its name from above numbers (3, 0.5 and 8) applied for designing this welded mesh. Calculated in millimeter, the size of the weld wire mesh opening will be 76.2mm in length x 12.7mm in height x 4mm (wire diameter).
From above data, 358 mesh is a strong security screen combined with a thick wire diameter of 4mm, and a small opening in height. This design provides a barrier that is difficult to climb or penetrate. The closely arranged wires are welded to form an anti-climbing mesh panels. The hole height is only 12.7mm which is totally impossible for fingers to catch and difficult for tools to conduct holding or cut. Almost impossible to cut wires by use of conventional bolt or wire cutters. With the anti-climbing and anti-cutting and finger-proof features, 358 mesh makes ideal security fencings for bridge guarding, prison security fencing, electrical sub-station fencing, gas pipeline security fence as well as safety barrier for those sites and facilities of public health and public safety.
The security level can be enhanced with using of Barbed Wire and Razor Wire Concertina spirals on the 358 weld mesh fence panels. 358 Mesh with concertina (crossed razor wire) provides the highest degree of physical perimeter protection. It is ideal for sensitive areas and militaries areas requiring the maximum degree of security.
Contact us to discuss your requirements of 358 prison mesh. Our experienced sales team can help you identify the options that best suit your needs.