Acrylic pipes can be suitable for various projects, from plumbing to crafts.
If you want to learn more, please visit our website.
In some cases, you may need to bend the acrylic tubing to connect parts or workaround fixed objects properly.
Bending an acrylic pipe is a relatively simple process.
So how does the acrylic tube bend?
It&#;s a bit difficult actually to operate. Need to be mentally prepared?
Materials you need:
acrylic pipe
adhesive strip
heat gun
Perspex tubes are easy to deform under extremely high-temperature conditions.
Therefore, we need to fill the hollow tube to prevent this deformation from damaging the pmma pipe.
You can use sand. But you&#;re better off using glue strips. It is more convenient.
Then you need to prepare a strip of the right size to fit perfectly into your pmma pipe.
XISHUN Acrylic supply professional and honest service.
After that, you need to use a heat gun to heat the pmma tubing. And place the heat gun vertically on the table.
Most importantly, the temperature cannot be too high.
The plexiglass tube will generate air bubbles if the temperature is too high.
So, you want to control between 160 degrees Celsius to 270 degrees Celsius.
Meanwhile, don&#;t stay in the same area for too long during the heating process.
You can rotate the pmma pipe left and right. It will heat it evenly.
In addition, the bending process also requires continuous heating. Pay attention to the uniform heating. It depends on your hand control.
Finally, wait for the acrylic pipe to cool and remove the rubber strip.
It ends here. You can get a perfectly curved acrylic tube.
For more information, please visit acrylic tubes wholesale.