STRUCTURE
Please visit our website for more information on this topic.
Steel cable rubber conveyor belts are commonly used for transport of products at lengthy ranges and heavy loads which have high resistance. The steel cable conveyor belts are used also in high-speed transport at brief distances. These conveyor belts need only a very short take-up stroke.
The belt structure with its longitudinally ordered steel cables skeleton is resistant to fatigue because of flexing.
Thus, smaller diameter drive pulleys can be used to design equipment of smaller size. The steel wires are bonded with high level of adhesion to the fabric on their ground.
The rubber of the rubber conveyor belt with steel wires is therefore firmly attached to the steel cables and shockproof, enhancing the belt life. Steel cables are structured uniformly and have the same strain, which makes the belt upright and functional.
As the carcass doesn't have longitudinal yarns, the steel wire rubber conveyor belt carry more stuff within greater inclination.
CORD STRUCTURE
7×7 : Applied to low tension lines
7×19 : Applied to high tension lines used.
Features: high tensile strength, low extensibility, small used transmission pulley diameter, uniform steel wire rope
tension, excellent troughbility and good adhesive between rubber and steel wire.
Applicable environment: The belt realizes conveying a large amount of materials at long distance and at high speed in the fields of coal, mine, ports, metallurgy, electric power, chemical engineering, etc.
Technical data: The steel cord conveying belt has the general used, high abrasion, cold-resistant and flame-retardant according to the using requirement and the performance of the cover rubber.
Specification:
Strength:630N/m----N/mm
Width (mm):800mm-mm
Item
ST630
ST800
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
Tensile strengthN/mm
630
800
Diametermm
3
3.5
4.0
4.5
5.0
6.0
7.2
8.1
8.6
8.9
9.7
10.9
11.3
pitchmm
10±1.5
10±1.5
12±1.5
12±1.5
12±1.5
12±1.5
15±1.5
15±1.5
15±1.5
15±1.5
16±1.5
17±1.5
17±1.5
Top cover thicknessmm
5
5
6
6
6
8
8
8
8
8
8
8.5
9
Bottom cover thicknessmm
5
5
6
6
6
8
8
8
8
8
8
8.5
9
Width mm
Number of steel cord
ST630
ST800
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
800
75
75
63
63
63
63
50
50
50
95
95
79
79
79
79
64
64
64
64
59
55
55
113
113
94
94
94
94
76
76
77
77
71
66
66
133
133
111
111
111
111
89
89
90
90
84
78
78
151
haichuan are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.
151
126
126
126
126
101
101
104
104
96
90
90
171
143
143
143
143
114
114
117
117
109
102
102
159
159
159
159
128
128
130
130
121
113
113
176
141
141
144
144
134
125
125
193
155
155
157
157
146
137
137
Note: 1. Thickness of cover rubber, Diameter of steel cord and pitch of steel cord can be customized according to the requirement of the customer after negotiation.
2. The belt can be produced according to the requirement of the customer under the standards of the German DIN, Australia AS133, Japan JISK, etc
Performance of the cover rubber
Item
perfomance
H
D
L
Tensile strength
MPa
24.0
18.0
15.0
Elongation at break
%
450
400
350
abrasion
Mm3
120
90
200
Adhesive
strength
Adhesive of Steel cord
strength
Adhesive of steel cord
Before aging
After aging
Before aging
After aging
ST630
60
55
ST
140
130
ST800
70
65
ST
145
140
ST
80
75
ST
150
145
ST
95
90
ST
165
160
ST
105
95
ST
175
170
ST
105
95
ST
180
175
ST
130
120
Minimum Pulley Diameter
Item
ST630
ST800
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
Minimum pulley diameter (mm)
500
500
630
800
The data are only for type selection of the conveyor belt and Zhejiang Sanwei Rubber Item Co.,LTD. has the final explanation right.
For more information, please visit Steel Cord Conveyor Belt Specifications.