Demystifying LED Emergency lighting power loads

This approach of constant power will exceed the requirements for NFPA® 101® Life Safety Code®, which allows for a 40% drop in light output (so 40% drop in power) over the required 90-minute run time. In most situations, the battery will need to be larger to meet the extra power demand which could lead to potential form factor issues for installers as a larger battery will be needed, requiring a larger housing. Even though it meets the minimum time requirement to stay in emergency mode, other forms of technology, like regulated power, if in the same situation, have been shown to last longer while in emergency mode and still meet the NFPA® 101® Life Safety Code®. (Figure 1) The additional time provided with regulated power can allow individuals to navigate their way in an emergency and/or get out of a dangerous situation.
 

Regulated Power

Regulated power conserves energy by “regulating” the power which allows emergency lighting fixtures to last longer during an emergency while guaranteeing to meet NFPA® 101® Life Safety Code®. This enables smaller form factors and like constant power, does not require any additional configuration to guarantee the light fixture will meet NFPA® 101® Life Safety Code®. Regulated power may use a tapered light output, but the difference in lumen output is indiscernible to the naked eye.
 

Some of the benefits of regulated power are that it offers smaller form factors, reduces battery costs, and does not require any additional configuration, which help installers when in the field. Regulated power has been a standard in emergency lighting for over 50 years and is the standard for fluorescent, halogen and incandescent emergency lighting fixtures. Regulated power is patented by Bodine and found exclusively in Bodine LED emergency drivers; other companies utilize other less efficient methods to provide emergency power to emergency fixtures while maintaining code compliance.
 

Constant Current