5 Things to Know Before Buying Smd Electronic

14 Apr.,2024

 

Introduction

Surface Mount Device (SMD) components are integral elements in the world of electronics. These tiny devices have paved the way for miniaturized circuits, enabling sleeker designs and enhanced performance. SMD components play a crucial role in the functioning of electronic circuits, making it essential for anyone involved in electronics to understand them. Whether you're an electronics enthusiast, a professional engineer, or simply curious about the inner workings of your everyday devices, this guide will provide you with a comprehensive understanding of SMD components.

Understanding SMD Components

Surface-mount devices (SMDs) are electronic components mounted directly to the surface of a printed circuit board (PCB). They have largely replaced through-hole technology (THT) components, which require holes to be drilled in the PCB for installation. SMD components are preferred due to their smaller size and higher component density, which allows for more compact and efficient circuit design.

SMD components play a critical role in the functioning of electronic devices. They are used in virtually all modern electronic equipment, including computers, mobile phones, and home appliances. Their primary function is to control the flow of electricity in a circuit, but they can also perform various other tasks depending on the specific component type.

The use of SMD components offers several advantages over traditional through-hole components. Firstly, they are smaller and lighter, which allows for the creation of smaller and more portable electronic devices. Secondly, they can be placed on both sides of a PCB, increasing the circuit density and allowing for more complex circuit designs. Finally, SMD components can be installed using automated equipment, which reduces manufacturing costs and increases production speed.

Basic Types of SMD Components

Surface Mount Device (SMD) components come in a variety of types, each with its unique function in an electronic circuit. The basic types of SMD components include resistors, capacitors, and inductors.

Resistors

Resistors are one of the most common types of SMD components. They are used to limit the flow of electric current in a circuit. The resistance of a resistor is measured in ohms (Ω), and SMD resistors typically have resistance values ranging from 1 ohm to several megaohms.

Resistors on the Printed Circuit Board Assembly (PCBA) of an electronic device

SMD resistors come in various types, each designed for a specific application. For instance, thin-film resistors are known for their high precision and stability, making them ideal for precision applications such as instrumentation. They are typically available in resistance values ranging from 1 ohm to 3 megaohms, with tolerance values as low as 0.01%. [1]

On the other hand, thick-film resistors are more common and less expensive than thin-film resistors. They are typically used in general-purpose applications where high precision is not required. Thick-film resistors are available in a wide range of resistance values, from 1 ohm to several gigaohms, with tolerance values typically ranging from 1% to 5%.

Another type of SMD resistor is the current sense resistor, which is used to measure electric current. These resistors have very low resistance values, typically less than 1 ohm, and are designed to produce a voltage drop, proportional to the current flowing through them. This voltage drop can then be measured and used to calculate the current.

In addition, specialty resistors such as wire-wound resistors, known for their high power handling capability, and metal foil resistors offer extremely high precision and stability. The choice of resistor type depends on the specific requirements of the application.

Capacitors

Capacitors are another fundamental type of SMD component. They store and release electrical energy in a circuit, acting like a temporary battery. Capacitors are used in various applications, including filtering noise, stabilizing voltage, and storing energy for later use.

Capacitors on the Printed Circuit Board of an electronic device

The capacitance of a capacitor, which measures its ability to store electrical charge, is measured in farads (F). However, most capacitors used in electronic circuits have capacitance values in the microfarad (µF), nanofarad (nF), or picofarad (pF) range.

SMD capacitors come in several types, each with its unique characteristics. Ceramic capacitors are the most common type of SMD capacitor. They are inexpensive, have a wide range of capacitance values, and are non-polarized, meaning they can be installed in either direction. However, their capacitance can vary with temperature and voltage, which can disadvantage precision applications.

Tantalum capacitors are another type of SMD capacitor. They offer higher capacitance values and better stability than ceramic capacitors, but they are polarized and more expensive. Tantalum capacitors are typically used in power supply circuits due to their high capacitance-to-volume ratio. [2]

Another type of SMD capacitor is the film capacitor. Film capacitors are known for their high precision, stability, and reliability. They are typically used in high-frequency applications such as RF circuits and high-quality audio equipment.

Finally, there are electrolytic capacitors, which offer very high capacitance values but have lower precision and stability than other capacitors. They are polarized and have a limited lifespan, especially when operated at high temperatures. Electrolytic capacitors are typically used in power supply circuits requiring high capacitance.

Each type of capacitor has its strengths and weaknesses, and the choice of capacitor type depends on the specific requirements of the application.

Recommended Reading: How to Discharge a Capacitor: Comprehensive Guide

Inductors

Inductors are another type of SMD component that play a crucial role in electronic circuits. They are used to store energy in a magnetic field when electric current flows through them. Inductors are primarily used in analog circuits and power supplies to filter out high-frequency noise and stabilize the current flow.

Toroidal inductors and a transformer during the PCB manufacturing of an electronic device

The inductance of an inductor, which measures its ability to store energy in a magnetic field, is measured in henries (H). However, most inductors used in electronic circuits have inductance values in the microhenry (µH) or nanohenry (nH) range.

SMD inductors come in several types, each with its unique characteristics. Wirewound inductors are the most common type of SMD inductor. They are made by winding a wire around a magnetic core, offering high inductance values and high current handling capability. However, their inductance can vary with frequency, disadvantaging high-frequency applications.

Another type of SMD inductor is the multilayer inductor. Multilayer inductors are made by stacking multiple layers of a magnetic material, and they offer high inductance values in a small package. However, they have lower current handling capability compared to wire-wound inductors.

Ferrite bead inductors are a particular type of inductor used to filter out high-frequency noise in electronic circuits. They are made by threading a wire through a bead made of ferrite material. [3] Ferrite bead inductors have high resistance at high frequencies, which allows them to filter out the high-frequency noise. 

Each type of inductor has its strengths and weaknesses, and the choice of inductor type depends on the specific requirements of the application. For instance, a wire-wound inductor might be chosen for a power supply circuit due to its high current handling capability. In contrast, a ferrite bead inductor might be chosen for a signal processing circuit due to its noise-filtering capability.

Advanced Types of SMD Components

Advanced types of SMD components or Small Outline Transistors (SOT) include diodes, transistors, and integrated circuits (ICs). These components are more complex than basic surface mount components and are used in a wide range of applications, from power management to signal processing.

Diodes

Diodes are semiconductor devices that allow current to flow in one direction while blocking it in the opposite direction. They are used in various applications, such as rectification, voltage regulation, and signal processing.

Semiconductor diode during the PCB assembly process of an electronic device

SMD diodes come in several types, each with its unique characteristics and applications. One common type is the rectifier diode, which converts alternating current (AC) to direct current (DC) in power supplies. Rectifier diodes have a high current handling capability and can withstand high reverse voltages.

Another type of SMD diode is the Schottky diode, known for its low forward voltage drop and fast switching speed. Schottky diodes are used in high-frequency applications, such as radio frequency (RF) circuits and switching power supplies. [4]

Zener diodes are another type of SMD diode, used for voltage regulation. They have a specific voltage limit beyond which they begin to conduct in the reverse direction. This property allows them to maintain a constant voltage across their terminals, making them useful for voltage regulation in electronic circuits.

Light-emitting diodes (LEDs) are a particular type of diode that emits light when a current flows through them. SMD LEDs are used in a wide range of applications, from indicator lights to display panels.

triode is a vacuum tube consisting of three electrodes: a heated filament or cathode, a grid, and a plate (anode). SMD triodes are used in a wide variety of electronic devices, and they offer a number of advantages over traditional through-hole triodes.

Each type of diode has its strengths and weaknesses, and the choice of diode type depends on the specific requirements of the application. For instance, a rectifier diode might be chosen for a power supply circuit due to its high current handling capability, while a Schottky diode might be chosen for a high-frequency application due to its fast switching speed.

Transistors

Transistors are semiconductor devices that amplify or switch electronic signals and electrical power. They are one of the most important components in modern electronics industry and are used in various applications, from digital logic circuits to power amplifiers.

Transistor on an LCD TV printed circuit board

SMD transistors come in several types, each with its unique characteristics and applications. One common type is the bipolar junction transistor (BJT), which consists of two semiconductor junctions and can be NPN or PNP. BJTs are used in various applications, such as amplification, switching, and voltage regulation.

Another type of SMD transistor is the field-effect transistor (FET), which operates by controlling the flow of current through a semiconductor channel. FETs are further divided into two main categories: junction gate field-effect transistors (JFETs) and metal-oxide-semiconductor field-effect transistors (MOSFETs). [5] JFETs are typically used in low-noise, high-input impedance applications, while MOSFETs are used in high-speed switching and power management applications.

MOSFETs are particularly popular in modern electronics due to their high switching speed, low power consumption, and high input impedance. They come in two main types: enhancement-mode MOSFETs and depletion-mode MOSFETs. Enhancement-mode MOSFETs are normally off and require a gate voltage to turn on, while depletion-mode MOSFETs are normally on and require a gate voltage to turn off.

Each type of transistor has its strengths and weaknesses, and the choice of transistor type depends on the specific requirements of the application. For instance, a BJT might be chosen for a linear amplifier circuit due to its high current gain, while a MOSFET might be chosen for a switching power supply due to its high switching speed and low power consumption.

Recommended Reading: PMOS VS NMOS: Focus on Two Main Forms of MOSFET

Integrated Circuits (ICs)

Integrated Circuits (ICs) are complex electronic components that contain multiple transistors, diodes, resistors, capacitors, and other components on a single semiconductor chip. ICs are used in various applications, from microprocessors and memory chips to analog-to-digital converters and power management circuits.

Integrated Circuit (IC) on computer motherboard

SMD ICs come in various types, each designed for a specific application. One common type is the digital IC, which includes microprocessors, microcontrollers, and digital signal processors (DSPs). Digital ICs are used in applications requiring processing and manipulating digital data, such as computers, smartphones, and digital audio equipment.

Another type of SMD IC is the analog IC, which includes operational amplifiers (op-amps), comparators, and voltage regulators. Analog ICs are used in applications that involve the processing of analog signals, such as audio amplifiers, sensors, and power supplies. Mixed-signal ICs combine digital and analog circuits on a single chip. They are used in applications requiring digital and analog processing, such as data converters and radio frequency (RF) circuits.

Power management ICs are a specialized type of SMD IC, designed to manage and distribute power in electronic devices. They include voltage regulators, battery chargers, and power switches. Power management ICs are used in various applications, from mobile phones and laptops to electric vehicles and solar power systems.

Each type of IC has its strengths and weaknesses, and the choice of IC type depends on the specific requirements of the application. For instance, a digital IC might be chosen for a computer motherboard due to its high processing capability. In contrast, an analog IC might be chosen for an audio amplifier circuit due to its ability to process analog signals.

Recommended Reading: What is a Semiconductor? A Comprehensive Guide to Engineering Principles and Applications

SMD Component Sizes and Codes

SMD components come in various sizes and codes, which are essential to understand when selecting and using these components in electronic circuits. The size and code of an SMD component provide information about its physical dimensions and electrical characteristics, allowing engineers and technicians to choose the appropriate component for a specific application.

SMD components are typically identified by a standardized code system, which consists of alphanumeric characters. This code system varies depending on the type of component, such as resistors, capacitors, or inductors.

Resistor Sizes and Codes

SMD resistors are identified by a three or four-digit code, which indicates their resistance value, and tolerance. The first two or three digits represent the significant figures of the resistance value, while the last digit indicates the multiplier. For example, a resistor with the code "103" has a resistance value of 10 x 10^3 ohms, or 10 kilohms.

Resistors of different codes and sizes

SMD resistors also come in various standard sizes, denoted by a two-digit code, such as 0402, 0603, or 0805. The first two digits represent the length of the resistor in hundredths of an inch, while the last two digits represent the width. For example, a 0603 resistor measures 0.06 inches in length and 0.03 inches in width.

Capacitor Sizes and Codes

SMD capacitors are identified by a three-digit code, which indicates their capacitance value and voltage rating. The first two digits represent the significant figures of the capacitance value, while the last digit indicates the multiplier. For example, a capacitor with the code "104" has a capacitance value of 10 x 10^4 picofarads, or 100 nanofarads. 

Capacitors of different colors and sizes

Like resistors, SMD capacitors come in various standard sizes, such as 0402, 0603, or 0805. The size code follows the same convention as resistors, with the first two digits representing the length and the last two digits representing the width.

Inductor Sizes and Codes

SMD inductors are identified by a four-digit code, which indicates their inductance value and tolerance. The first three digits represent the significant figures of the inductance value, while the last digit indicates the multiplier. For example, an inductor with the code "1002" has an inductance value of 10 x 10^2 microhenries or 1 millihenry.

Toroidal inductors and transformers of different specifications

SMD inductors also come in various standard sizes, similar to resistors and capacitors. The size code follows the same convention, with the first two digits representing the length and the last two digits representing the width. 

Understanding surface mount component sizes and codes is crucial for selecting the appropriate components for a specific application and ensuring the proper functioning of electronic circuits.

SMD Component Selection and Application

Careful selection of SMD components

Selecting the appropriate SMD packages for a specific application is crucial to ensure the proper functioning and performance of an electronic circuit. Several factors need to be considered when choosing SMD components, which include: 

Electrical Characteristics

The electrical characteristics of an SMD component, such as resistance, capacitance, or inductance, must be suitable for the intended application. For example, a resistor with the correct resistance value is necessary to limit the current flow in a circuit. In contrast, a capacitor with the appropriate capacitance value is required for filtering or energy storage purposes. It is essential to consult datasheets and reference designs to determine the appropriate electrical characteristics for a specific application.

Physical Dimensions

The physical dimensions of an SMD component, such as its length, width, and height, must be compatible with the available space on the printed circuit board (PCB). Additionally, the component size should be suitable for the manufacturing process, as smaller components may require more precise placement and soldering techniques. Standard SMD component sizes, such as 0402, 0603, or 0805, can be used as a starting point when selecting components for a specific application.

Compatibility with Other Components

SMD components must be compatible with other components in the circuit, both electrically and mechanically. For example, a capacitor with a high voltage rating may be required if it is connected to a high-voltage power supply, while a resistor with a high power rating may be necessary if it is used in a high-current application. Additionally, components with similar temperature coefficients should be used in temperature-sensitive applications to ensure consistent performance over a wide temperature range.

Examples of SMD Component Selection and Application

  1. In a power supply circuit, a combination of SMD resistors, capacitors, inductors, diodes, and transistors may be required to regulate and filter the output voltage. The selection of these components will depend on factors such as the input voltage, output voltage, load current, and efficiency requirements.

  2. In a radio frequency (RF) circuit, SMD capacitors and inductors may create filters that allow specific frequencies to pass while blocking others. The selection of these components will depend on the desired filter characteristics, such as the center frequency, bandwidth, and attenuation.

  3. In a microcontroller-based circuit, SMD resistors and capacitors may be used for pull-up or pull-down resistors, decoupling capacitors, and timing circuits. The selection of these components will depend on factors such as the microcontroller's input and output requirements, power supply voltage, and timing constraints.

By carefully considering the electrical characteristics, physical dimensions, and compatibility with other components, the appropriate SMT components can be selected for a specific application, ensuring the optimal performance of the electronic circuit.

Soldering and Handling SMD Components

Soldering and handling SMD components require specific techniques and precautions to ensure the proper functioning and reliability of electronic circuits. SMD connectors are typically soldered to the PCB using a surface mount technology (SMT) process. The small size and delicate nature of SMD components make them more susceptible to damage during soldering and handling processes.

Soldering SMD component on Printed Circuit Board

Soldering Techniques

Soldering SMD components typically involves solder paste, a mixture of solder particles and flux. The solder paste is applied to the PCB pads using a stencil or a syringe, and the SMD components are then placed on the pads using tweezers or automated pick-and-place machines. The PCB is then heated in a reflow oven, which melts the solder paste and forms a reliable electrical and mechanical connection between the component and the PCB. Ball Grid Array (BGA) components are typically more difficult to solder and desolder than other SMD components, as they are located on the underside of the package. 

Several key factors are to consider when soldering SMD components:

  1. Solder paste quality: The solder paste should have the appropriate viscosity and metal content to ensure proper wetting and adhesion to the PCB pads and component terminals.

  2. Stencil design: The stencil should be designed to provide the correct amount of solder substrate on each pad, ensuring a reliable connection without causing solder bridges or insufficient solder joints.

  3. Reflow profile: The reflow oven should be programmed with the appropriate temperature profile, which includes preheating, soaking, reflow, and cooling stages. This ensures that the solder paste melts and forms a reliable joint without damaging the components or the PCB. [6]

  4. Component alignment: The SMD components should be accurately placed on the PCB pads to ensure proper alignment and electrical connection. 

QFP packages are commonly used for high pin count SMD integrated circuits, SOIC, or Plastic Leaded Chip Carrier (PLCC) components such as microprocessors, memory chips, and field-programmable gate arrays.  

Handling Precautions

Handling SMD components requires care and attention to avoid damage and ensure the reliability of the electronic circuit. Some key precautions to consider when handling SMD packages include:

  1. Electrostatic discharge (ESD) protection: Many SMD components, such as ICs and transistors, are sensitive to electrostatic discharge, which can cause permanent damage. It is essential to use ESD-safe tools, such as tweezers and workstations, and to wear ESD wrist straps when handling these components. [7]

  2. Mechanical stress: SMD components can be damaged by excessive mechanical stress, such as bending or twisting. Care should be taken when handling and placing these components to avoid applying excessive force.

  3. Temperature and humidity control: SMD components can be sensitive to temperature and humidity, which can affect their electrical characteristics and reliability. It is essential to store and handle these components in a controlled environment to ensure their long-term performance.

By following the appropriate soldering techniques and handling precautions, SMD or SMT components can be successfully integrated into electronic circuits, ensuring optimal performance and reliability.

Recommended Reading: Solder Reflow: An In-Depth Guide to the Process and Techniques

Conclusion

In conclusion, understanding the various types of SMD components, their functions, and applications is essential for anyone involved in electronics. From SOT components like resistors, capacitors, and inductors to advanced components such as diodes, transistors, and integrated circuits, each component plays a crucial role in the functioning of electronic circuits. Proper selection, soldering, and handling of these components are vital to ensure the optimal performance and reliability of electronic devices.

FAQs

Q: What are SMD components?

A: SMD (Surface Mount Device) components are electronic components that are mounted directly onto the surface of printed circuit boards (PCBs). They are used in a wide range of electronic devices and offer advantages such as smaller size, higher component density, and compatibility with automated manufacturing processes.

Q: What are the basic types of SMD components?

A: The basic types of SMD components include resistors, capacitors, and inductors. Each type has a specific function in electronic circuits, such as limiting current flow, storing electrical energy, or filtering signals.

Q: What are some advanced types of SMD components?

A: Advanced types of SMD components include diodes, transistors, and integrated circuits (ICs). These components are more complex than basic SMD components and are used in a wide range of applications, from power management to signal processing.

Q: How are SMD components sized and coded?

A: SMD components are sized and coded using standardized alphanumeric codes that indicate their physical dimensions and electrical characteristics. These codes vary depending on the type of component, such as resistors, capacitors, or inductors.

Q: What precautions should be taken when soldering and handling SMD components?

A: When soldering and handling SMD components, it is essential to use appropriate soldering techniques, such as using solder paste and a reflow oven, and to follow handling precautions, such as protecting against electrostatic discharge (ESD), avoiding excessive mechanical stress, and controlling temperature and humidity.

References

[1] Passive Components Blog. SMD Surface Mount Chip Resistor Selection Guide [Cited 2023 October 17] Available at: Link

[2] Electronics Notes. Understanding Tantalum Capacitors: technology, types, leaded, SMD [Cited 2023 October 17] Available at: Link

[3] Altium. How Do Ferrite Beads Work and How Do You Choose the Right One? [Cited 2023 October 17] Available at: Link

[4] Byjus. Schottky Diode [Cited 2023 October 17] Available at: Link

[5] ScienceDirect. Field Effect Transistor [Cited 2023 October 17] Available at: Link

[6] Research Gate. SMD Reflow Soldering: A Thermal Process Model [Cited 2023 October 17] Available at: Link

[7] ST Microelectronics. ESD Protection [Cited 2023 October 17] Available at: Link

As others have said, SMD is really quite cheap, so you can get one of the binders to get started. I personally don't get SMD unless I need it. I usually use TH for prototyping (if possible). If I go to PCB I go for SMD components.

An exception to this is if you do a lot of repair work - getting some resistor/capacitor binders can be usefull.

Unless space is an issue, 1206 can be nice in the begging. I default to 0805, 0402 for RF/high density. I do however tend to stock up by default, because most places I order from have minimum order quantities of 10-20 resistors. I'm still working on how to sort them tho - but I do try to write the value on the tape of capacitors (resistors sizes 0805 and up generally have the value printed on them).

Of course, all this might change if you don't have access to a distributor like Farnell, RS, ... and you need to get your parts through Amazon bundels or something.

5 Things to Know Before Buying Smd Electronic

Which SMD components to stock up on?