If you want to learn more, please visit our website.
This author has not yet filled in any details. So far the author has created 1 blog entries.
Sometimes the right specialty abrasive tool is easy to find, while other times, we need to scour our supply chains to find it (and we always do). In some cases, we might even have it custom made for our customers. Either way, there&#;s a right tool for the job and a right way to use that tool. Here&#;s my take on industrial abrasives, their recommended uses, and some safety tips for your production floor.
Specialty abrasive tools are used for preparing parts for production or assembly. They&#;re either handheld tools or they&#;re driven by a grinder or sander and they come in a wide array of shapes, sizes, widths, and lengths meant for various purposes:
Specialty abrasives can be used on many types of metals including steel, cast iron&#;even exotics like Inconel. These small tools can do amazing things like take a hard, porous material all the way down to a mirrored finish. Their most common use in manufacturing is to simply remove material from whatever you&#;re working on, thereby eliminating sharp or rough edges in order to prepare surfaces for final finishing.
They say there&#;s a right tool for every job. Unfortunately, sometimes people are up against deadlines on the production floor and that can cause them to reach for the wrong tool. This can compromise the quality of the part, cause significant damage, or worse, create a major safety hazard. Here are my recommendations for &#;the right tool for the right job.&#;
Sanding Belts
are a seamed or continuous loop of material with abrasive grit on it.Best Uses:
Belt sanders are most often used to grind down a broad range of ferrous and non-ferrous materials, as well as wood.Pro Tip:
Sanding belts are the best way to achieve a smooth, level finish over longer lengths of material such as an entire airplane wing.Sanding/Grinding Discs
are a circular disc made of paper that is impregnated with abrasive grit.Wheel Brushes
If you want to learn more, please visit our website Hengxuan Abrasive.
are wire brushes that come in either end or cup style and can be knotted to achieve much more aggressive material removal.Best Uses:
Wheel brushes are typically used to remove paint, rust, or welding splatter.Pro Tip:
Just like an Oral B toothbrush, you can use an end wheel brush for those hard-to-reach areas.Utility Rolls or Handy Rolls
are long rolls of skinny sandpaper that you can cut by tearing.
Surely you&#;ve seen the Farmer&#;s Insurance commercials:
&#;We know a thing or two because we&#;ve seen a thing or two?&#;
I made a site visit recently (really). During my tour, I noticed that some of their guys were grinding the inside of an aluminum structure. Sparks were flying everywhere and I did not see proper ventilation of the area. A lot of things could have gone wrong from there, but luckily they didn&#;t.
While working with abrasives might seem like no big deal, I would be remiss here if I did not mention the following safety recommendations for working with industrial abrasive tools:
Most manufacturers have a lot of tribal knowledge on the production floor. However, if your team is unclear about the right abrasive tool for the job, I recommend talking to a manufacturing partner that specializes in them. Optimas carry a wide selection of belts, discs, and wheel brushes to get the job done.
If you&#;re seeking a focused range of in-demand consumables for your manufacturing facility, consider partnering with us to take advantage of our engineering, 3D Print, and cold form manufacturing capabilities.
If you are looking for more details, kindly visit abrasives supplier.