What is Elbow Pipe Fitting?
Elbow pipe fitting is one of the most common pipe fitting found in construction today. They have a wide range of uses and come in many different sizes and shapes, so it is important to know how they work before starting any project involving elbow pipes. Here we will cover everything you need to know about elbow pipe fitting, including what an elbow fitting is, how to install one correctly, the various types available on the market, and more!
An elbow pipe fitting is used in the plumbing industry for directing flow. It can be installed at an angle by using a T-shaped device which is referred to as Elbow Fitting, or it can connect two pipes with each other without crossing paths (90 degrees). Generally, the end of 90 degree elbows have male threads so that they can be connected to a water pipe. Most of the times, elbows have female threads on the other end and are installed into male fittings like valves or flanges.
The elbow fitting is also used in gas lines as well because it can reduce the number of joints that connect two gas pipes together which ultimately results in less leakage chances if there is any.
Proper installation of elbow fitting can reduce the chance of leakage up to 50% and it is recommended that you hire a professional expert if you do not have enough knowledge about plumbing or installing one yourself, this would be your best option. However, there are some DIY techniques which will help you out with getting rid of issues like leakage.
If you have a gas pipe, the recommended installation procedure is to install your elbows first and then connect them with T fittings (which are installed after elbows) as they will provide support for your plumbing system which ultimately results in less leakage chances if there is any.
The Correct Way to Install an Elbow Pipe Fitting
In order to install a 90-degree elbow in its proper place, you need to use elbows as well as other fittings such as tees or crosses. This type of fitting has been used since ages for connecting pipes with each other without crossing paths. The elbow pipe fitting is usually installed in a T-shaped device which refers to an Elbow Fitting, and the end of 90 degree elbows have male threads on both sides so that it can be connected easily with water pipes. Usually, these types of fittings have female threads at one side while being attached to other plumbing devices such as valves or flanges.
When you are installing an elbow pipe fitting, the most important thing to keep in mind is that it should be parallel to the ground so that water can easily flow through them without causing any sort of issues. You also need to make sure that there is enough space between your elbows and other fittings which might be installed next to them because if there is not enough space then the fittings will touch each other and create a problem.
Different Types of Elbow Pipe Fitting
There are different types of elbow pipe fitting available in the market which can be used for many purposes such as reducing leakage chances, redirecting flow direction or providing support to other fittings. Some of the most common types are as follows:
1. 90 Degree Elbow Fitting:
As this is a male pipe fitting, it has threads on both ends and can be installed into female plumbing devices such as valves or flanges. It also provides support for elbows which have a T shaped device attached at one end.
Solid Product Page
2. 45 Degree Elbow Fitting:
This kind of elbow pipe fitting is used for redirecting the flow direction from one corner to another at a different angle which can be done by joining two pipes with each other. It also has male threads on both sides so that they can easily connect to female plumbing devices such as valves or flanges.
3. Straight Elbow Fitting:
This type of pipe fitting is used for redirecting the flow direction from one corner to another at a 90 degree angle. It also has male threads on both sides so that they can easily connect to female plumbing devices such as valves or flanges.
What is The Use of Elbows in Pipe fitting?
An elbow pipe fitting is a component of piping that allows it to change direction and/or aperture. Elbows are often used in plumbing, as they allow the pipe work to make sharp turns without causing damage or undue stresses on those pipes. On an irrigation system, elbows can be beneficial for allowing water flow at high pressure where gravity alone would not be sufficient to push the water through a particular system.
How Do You Calculate The Radius of an Elbow Pipe?
The radius of elbow pipe fitting is measured from the center point and it should be equal to half of the diameter of the thread. You can also calculate this easily by using a simple formula: R = D/16, where R stands for Radius and D represents Pipe Size (Inches). For example, if you have an inch size threaded pipe then the radius of your elbow pipe fitting would be equal to half of an inch.
Elbow Pipe Fitting vs Bends In Pipe Fittings
There is some confusion between elbow and bend pipes, as many people assume that they are interchangeable terms for two different types of piping components. However, there is an important distinction between each type of component so it's worth knowing what that difference is.
An elbow pipe fitting &#; sometimes also referred to as an ell or elbow piece - is a component of piping which allows it to change direction and/or aperture at a predetermined angle, usually 90 degrees (a right-angle). The bend in the other hand, can have any number of angles associated with it; there is no predetermined angle. For this reason it's referred to as a 'bend in pipe fitting'.
For more information, please visit Large range Pipe Fittings.