Key Questions to Ask When Ordering Uhmwpe Marine Fender Pads

13 May.,2024

 

Anti- abrasion uhmwpe marine dock fenders/Yellow ...

Anti- abrasion uhmwpe marine dock fenders/Yellow UHMWPE facing pad/hdpe fender pad

Read more


 

 

Product Description

 

 1. Flat uhmwpe pad for marine fender, hdpe facing pad, hdpe fender board.

UHMW-PE Fender pads and fenders are produced by a sintering process either from virgin or from reclaimed  material (aprox. 70% reclaimed +30% virgin material - also named double-sintered or blended UHMW-PE).

 

UHMW-PE (UltraHighMolecularWeight-PolyEthylene) combines highest strength with wear resistance and 

consequently provides the best  durabilty of all available Polyethylene products. 

 

2. Advantage of Flat uhmwpe pad for marine fender, hdpe facing pad, hdpe fender board.

  • Very high impact strength
  • Very low friction coefficient
  • Very high abrasion resistance
  • UV + Ozone resistant
  • Non-conducting (optional)
  • 100% recycable, non-rottening
  • Cut to size sheet ,all size is available with us 
  • Standard colour :Black ,Yellow ,Blue ,Green ,Red,White  ,other colour is available upon request .

3. Application of Flat uhmwpe pad for marine fender, hdpe facing pad.

  • low resistance sliding plates on fender panels
  • low resistance slinding panels for bridge and pier protection
  • corner protection for offshore structures, berths and other marine facilities

UHMW-PE Flat Fender pad ,UHMW-PE Corner Fender pad ,UHMW-PE Edge Fender pad all is available:

 

a.  Characters of UHMW-PE and HDPE marine fender pads

  •  Very flat on the surface
  • The thickness tolerance is +2-0, some made according to your requirement.
  •  The standard color is white(natural), black, blue, green, red, yellow, orange, and it can be done according to you.
  • An accurate size of UHMW-PE sheet with advanced machine.
  • Different shaped UHMW-PE Sheets also can be supplied by Abosn like bending sheet.
  •  According to different requirements with different application, special specification can be customized, like anti-UV, fire-resistant, anti-static and other characters.

b. Key properties of UHMW-PE UHMW-PE and HDPE marine fender pads

  • Extremely high impact strength
  • Excellent wear and abrasion resistance
  • Optimal sliding properties
  • Dimensional stability
  • Energy absorption capacity at high loading rates
  • Resistance against fatigue
  • Water repellent
  • Good chemical resistance
  • Excellent electrical and dielectric properties
  • Physiologically harmless 

 

4. The technical data of Flat uhmwpe pad for marine fender, hdpe facing pad, hdpe fender board:

 

5.  the application of UHMW-PE fender pad

 

 

Packaging & Shipping

 

Our Services

 

Xinxing focus on what our customers demand and dedicate to produce satisfying productsand innovate 

new types products to our customers:

  1. In processing of products, we strictly manager our workers to pay attention to every details, asking there is  no any error in products.
  2. We have strict Quality Control(QC) in order to make sure that all details of products meet customers’ requirement.
  3. Before delivery, we will be responsible for package all products perfectly in order to make sure there is no  anydamage of products in transportation. 
  4. In transportation, we will track the details of shipment and feedback to our customers timely and make sure  our customers will receive the products on time.
  5. After receiving products, if you have any question, we will try our best to serve you. And welcome to your  more orders in the future

Company Information

 

Our Xinxing Company

  • Mainly manufacture HDPE and UHMWPE products.
  • Have rich experience in the line of engineer plastic products for long time.
  • Passed the latest ISO9001:2008 quality system.
  • Located in Shandong, the third-largest port city in China.  
  • Convenient traffic and developed imports and exports

  Contact us

  

 If you have any question, please do not hesitate to contact me. 

 

Thanks for your visiting! 

FAQs for UHMW-PE - Lijiu Plastics

In this blog, you can find frequently asked questions about UHMWPE.

What is UHMWPE?

UHMWPE  is a material that has good wear resistance, excellent impact strength, and good self-lubrication.   It is the King of Engineering plastics.

What is UHMWPE stands for?

kenuo supply professional and honest service.

UHMWPE stands for Ultra high molecular weight of polyethylene. It is the highest quality polyethylene ( PE) available, engineered for tough jobs and a wide range of applications. It delivers savings in a number of industry applications.

What is the density of UHMW?

Its density is 0.94-0.96 g/cm^3.

Which is stronger HDPE or UHMW?

UHMW material property is better than HDPE, and it always is produced by the pressing method, while HDPE is normally produced by extrusion, the pressing method can make the material stronger than extrusion. so UHMWis much stronger than HDPE.

Is UHMW bulletproof?

UHMWPE fiber material is bulletproof, which can be used for making bulletproof and stabproof vests.  UHMWPE powder material can be used for other fields like making UHMWPE sheets for lining, harbor-facing pads, crane outrigger pads, wearing blocks, paper dewatering suction boxes, etc.

What is stronger than UHMW?

At the same price level, UHMWPE is the best cost-performance material among all kinds of engineering plastics.  It is strong enough in so many areas like wear resistance, impact strength, corrosion resistance, self-lubrication, etc.

Is UHMW stronger than steel?

From the wear resistance view, UHMWPE is 15 times stronger than carbon steel.

Which is harder UHMW or HDPE?

UHMWPE shore D hardness is 65-70, while HDPE is 60-65.

Does UHMW float in water?

Yes, UHMWPE virgin material density is 0.94-0.96 g/cm^3, which is less than 1, so it can float in water.

Which is harder Delrin or UHMW?

Delrin is stiffer and stronger in unfilled form, has shorter molding cycles, easy to machine, has low moisture absorption, and has a better surface finish.

Is nylon stronger than UHMW?

Nylon and UHMWPE are different.  They belong to engineering plastics but have different applications.  UHMW wear strips, chain guides, packaging machinery parts, and marine dock fender pads. Nylon is a strong and stiff engineering plastic with outstanding bearing and wears properties and they are used for bushings, rollers, rings, and pulleys, etc. They are all in their own applications strong plastics.

Can UHMW be welded?

Yes, it can, but UHMWPE can only weld the same material, if for other materials like HDPE, then it is not possible.

Can you bend UHMW with a heat gun?

If the thinner UHMWPE sheets ( thickness under 10 mm ) can be bent with the screws, a heat gun helps too.

What will stick to UHMW?

If want to stick some different materials to UHMWPE, need to use special binders, then can stick Delrin, rubber, polyethylene, wood, metals, glass, and concrete to UHMWPE.

Can UHMW be drilled?

Yes, when molding the UHMWPE raw material into sheets, then it can be drilled with different size holes or different depth grooves.

Does UHMW absorb water?

We can treat UHMWPE material and its thermoplastic plastic sheets with 0 water absorption. That is why the UHMWPE liners are popular in truck and coalbin and hopper linings because they will not absorb water and not moisture absorption. So will not adhere to any materials to make the bock up the problem.

How do you glue UHMW to UHMW?

1. Wipe the oil stain or dust on the material name with rags first.

2. Use a brush or scraper to evenly brush the plastic glue on the UHMWPE sheet to be glued after treatment. The glue should be applied evenly in thickness and in place, without leaving blind spots. Apply adhesive on both sides if necessary.

3. After the glue is applied, it should be left in the air for 5 to 8 minutes (it is better to touch the glue without drawing), and then it should be pressed to make the two sides fit properly.

4. The fitting will have a certain strength immediately. The watch will dry for about 2 hours, and the strength will be measured after 24 hours.

What is the difference between white and black UHMW?

Usually, the UHMWPE granule or power is transparent, it has no color, when mixing the certain color master batch into raw material, then it can make different color sheets.  White color sheets are must pure and virgin material, but black color sheets may be virgin, or maybe recycled.

How much does a sheet of UHMW cost?

UHMW or UHMWPE sheets’ prices are different, it depends on their size and thickness. Generally, we calculate it per kg.

Is UHMW self-lubricating?

Yes, it is.  UHMWPE does not like steel, and needs to add lubricating oil, it can work naturally with very good self-lubricating and has an extremely low friction coefficient.

Does UHMW have a shelf life?

Under normal storage, the UHMW products can keep good property within 5-10 years.

Can you cut UHMW with a circular saw?

Yes, we can. unlike polypropylene, UHMW does not melt when you cut it, so the”chips” remain soft. The material does tend to collect on the saw blade, which will throw the material up as it is cut, so we will use a blade guard.

Can you cut UHMW with a water jet?

Yes, we can.  Water jet cutting is the preferred method for us to manufacture UHMWPE parts.

Do you grease UHMW bushings?

No, UHMWPE material has a very good self-lubricating property, it does not need any oil to grease.

Want more information on Uhmwpe Marine Fender Pads? Feel free to contact us.