Principle of electroplating automatic dosing device

27 Mar.,2025

The principle of electroplating automatic dosing device is mainly based on the photoelectric induction principle. The photoelectric sensor in the device will analyze the concentration of nickel plating solution in the plating tank online, and then adjust the dosage of the chemical solution automatically according to the pre-set program.

 

Author: Anna

 

Principle of electroplating automatic dosing device

 

The principle of electroplating automatic dosing device is mainly based on the photoelectric induction principle. The photoelectric sensor in the device will analyze the concentration of nickel plating solution in the plating tank online, and then adjust the dosage of the chemical solution automatically according to the pre-set program.

 

When the concentration of nickel ions in the plating solution changes, the photoelectric sensor will receive this information and send out a corresponding signal. This signal triggers the opening or closing of the dosing solenoid valve, thus controlling the addition of the dosing solution.

 

Application Scenarios of Plating Automatic Dosing Device

 

Plating automatic dosing device is widely used in various scenarios that require precise control of the amount of chemical water to be added, especially in the plating industry, for controlling the chemical composition of the plating solution to ensure the quality of plating.

 

In addition, the device is also suitable for other industrial processes that require precise control of chemical composition, such as wastewater treatment and water supply systems.